Epson TM-C7500G series User Manual

134
Printing barcode and 2D symbol
Sets specified number of point, language of the replaced True Type font by barcode and 2D symbol
font to the print data.
 The number of point for barcode and 2D symbol is specified, check it from [Barcode and 2D
Symbol] on [Driver Utilities]. The barcode and 2D symbol can not be printed if a value other
than those specified is set.
 The replaced True Type font can be used only for specifying barcode and 2D symbol, therefore,
if the character other than specified is used can not be printed. Make sure to use True Type font
that is not be used for other printing.

Epson TM-C7500G series Specifications

General

Print Technology	Inkjet
Ink Type	Pigment-based ink
Connectivity	USB, Ethernet
Operating Systems Supported	Windows, macOS
Media Handling	Roll-fed
Ink Cartridge	Individual CMYK cartridges
Cutter	Auto cutter
Print Speed	Up to 11.8 inches/sec (300 mm/sec) at 360 x 360 dpi