Epson TM-C7500G series

191
Appendix
When "Extend Printable Area" is enabled
Ver tical margins: 0 mm (Typical value)
Lateral margins: 0 mm (Typical value)
If you enabled “Extend Printable Area”, printing is done with settings for no margins, but the
printing might protrude beyond the paper/ label, depending on the actual print position and the
set position for the paper/ label. To make sure printing doesn’t protrude out, ensure margins of
1.5 mm {0.06"} or more in the print data.
Black mark position
Label area
Print area
Print area width
Auto-cut position
Auto-cut position
Perforated line
Paper width
Paper feeding
direction
Outer edge
(Removed)
2.0 mm { }
0.08”
Outer edge
(Removed)
2.0 mm { }
0.08”
25.4 mm { } or more
1.0”
28.4 mm { } or more
1.12”
1.5 mm { }
0.06”
0.5 to 1 mm { }
0.02 to 0.04”
Interval between labels 3.0 mm { }
0.12”
1.5 mm { }
0.06”