16
Connectors
All connectors are located on the lower rear of the printer.
For Standard, Wi-Fi, and Bluetooth models.
*) If the firmware version is 1.40 ESC/POS or later, a barcode scanner can also be connected. See the detailed
information on
"Compatibility with USB Type-A" on page 119.
1 USB connector Use only for connecting optional Wireless LAN unit and customer display.*
CAUTION:
It may be hard to disconnect some types of USB cable. Do not forcibly pull the cable, or the
USB connector and USB cable may be damaged. Contact qualified service personnel if you
encounter the trouble.
2 Power supply
connector
Connect the AC adapter.
See
"Connecting to the Power Source" on page 36.
3 USB connector
(Type B)
Connects the USB cable for connecting to a computer.
See
"Connecting the Printer to the Host Devices" on page 38.
4 Ethernet connector Connects the 10BASE-T/100BASE-TX ethernet cable.
5Drawer kick
connector
Connects the cash drawer or the optional external buzzer.
See
"Connecting the Cash Drawer" on page 34, and "Connecting the Optional External
Buzzer" on page 33
.