Epson tm-m30

59
Chapter 3 Advanced Usage
3
Setting/Check Modes
As well as print mode, the following modes are also provided for making various printer settings and checking
items.
• Self-test mode
• NV graphics information print mode
• Receipt Enhancement information print mode
• Software settings mode
• Restore default values mode
• Interface setup mode
• Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, Receipt Enhancement information print mode, Software settings mode,
and Restore default settings mode are selected depending on the Feed button operation performed during a
self-test.
Close the roll paper cover, and turn on the printer while pressing the Feed button.
Self-test
Briey press the Feed button. Hold down the Feed button.
Press the Feed button
once briey and then
hold it down.
Open the roll paper cover, and turn on the printer while pressing the Feed
button, and then close the roll paper cover.
Continuing the self-test
Mode selection guidance
NV Graphics
Information
Hexadecimal dumping
Press the Feed button
twice briey and then
hold it down.
Receipt Enhancement
Information
Press the Feed button
three times briey and
then hold it down.
Software Settings
Press the Feed button
four times briey and
then hold it down.
Restore Default
Values
Press the Feed button
ve times briey and
then hold it down.
Interface Setup