Epson tm-m30

47
Chapter 3 Advanced Usage
3
Advanced Usage
Software Settings
With the memory switches and customized values, which are software settings for this printer, you can set the
various functions.
For an outline of the functions, see the following section. Use the methods shown in the table below, or ESC/
POS commands for the settings.
Item\Method
TM Utility for iOS,
for Android
TM-m30 Utility
for Windows
Software
Setting Mode
Memory Switches
Receive buffer capacity ✔✔✔
BUSY condition
✔✔✔
Auto line feed
✔✔✔
USB power-saving function ✔✔✔
Release condition of receive buffer BUSY
✔✔✔
Select paper out detector enabled for paper out signal
output
✔✔✔
Error signal settings
✔✔✔
Pre-feed before next print ✔
*1
✔✔
Customized Values
User NV memory capacity
✔
NV graphics memory capacity
✔
Paper width ✔✔✔
Print density
✔✔✔
Print speed
✔✔✔
Character code table defaults ✔
International character defaults
✔
Command execution during offline ✔✔✔
Amount of top margin by backfeed ✔✔✔
Interface switch waiting time
✔✔✔
Main connection interface ✔✔✔
LED indicator when I/F starting ✔✔✔
Autocutting after closing cover
✔✔✔
Paper reduction ✔✔✔
Font A auto replacement ✔
Font B auto replacement
✔
Font C auto replacement ✔
Multi-tone print density
✔✔✔
Optional buzzer
✔✔
Communication condition of USB interface ✔✔