23
Chapter 1 Product Overview
1
Simple Setup for Wireless LAN
This printer comes with a mode (SimpleAP) that allows printers to connect with a smart device or a computer
without requiring a wireless access point. This allows you to easily setup a wireless LAN for the printer by using
a printer settings tool (Epson TM Utility, EpsonNet Config, or EpsonNet Config (Web version)) even without a
network environment such as access points.
If the wireless LAN connection settings are the initial settings (factory default), then the printer automatically
starts up in SimpleAP mode when the power is turned on and prints the following information. If you have
changed the wireless LAN connection settings from their initial settings, the printer starts up according to those
settings and connects to the access point.
SimpleAP Start
SSID
Encryption Type
Passphrase
IP Address
MAC Address
: EPSON_Printer
: WPA-2-PSK
: 12345678
: 192.168.192.168
: xx-xx-xx-xx-xx-xx