Epson UB-E03 - System Bootup Time

56
System Bootup Time
TheUB‐E03requiressomebootuptimeforinitializingthesystemafterpower‐onorsystemreset.
Therequiredbootuptimeisasfollows.Thenetworkcommunicationfunctionsareunavailable
duringsystembootup.
WhensettingtheIPaddressintheManualmode :Approximately15seconds
WhensettingtheIPaddressautomatically :Approximately
20seconds
(Thevaluemayvary,dependingonthe
responsetimeoftheDHCPserver.)