Epson UB-E03 - Product Overview; Features

Chapter 1 Product Overview
9
1
Product Overview
Thischapterexplainstheproductoverview.
Features
TheUB‐E03isinstalledintheTM‐seriesprintersasaninterfaceboardtoprovideEthernet
communications.
FeaturesoftheUB‐E03areasfollows:
Network Function
•10Base‐T,100Base‐TXEthernet
• SupportsTCP/IPprotocol.
• SupportsDHCP/APIPA.
•SNMPcapable.ThestatusoftheprintercanbeacquiredbyusingSNMP.
•IPv4capable.
Setting
•ThesettingutilityEPSONTMNetWinConfigisavailable.PleasedownloaditfromtheEPSON
Websiteanduseit.
•YoucancheckandsettheparametersbyusingaWebbrowser.
•Whenyoupushthepushbutton,thepresentnetworkparameterisinitializedandthesetting
conditionisprintedforyoutocheck.
Others
•Updatingthefirmwareispossibleviathenetwork.
•Low‐powerconsumptionmode
Low-power consumption mode:
The UB-E03 enters the low-power consumption mode if more than 3 seconds have passed
while none of the following is performed;
• Receiving Ethernet data
• Printing by the printer
• Receiving data from the printer
• Operating the push button
When any of the above is performed, The UB-E03 automatically returns to the normal
mode. The low-power consumption mode function cannot be disabled.