Epson UB-E03 - UB-E03 Specifications; Software Specifications; Supported Protocols

Chapter 4 UB-E03 Specifications
51
4
UB-E03 Specifications
ThischapterdescribesthespecificationsoftheUB‐E03.
Software Specifications
Supported Protocols
TheUB‐E03supportsthefollowingprotocols.
Printing Protocols
TheUB‐E03usesthefollowingprotocolforprinting.
•LP, LPR: Transfers printing data.
Protocol Application
IP, ARP, ICMP, UDP, TCP Basic communications protocols for various functions.
LP, LPR, TCP Socket Port Protocol for printing.
DHCP, APIPA Protocol for automatic settings of IP address, etc.
ENPC, SNMP Protocol for setting and monitoring.
HTTP Protocol using for EPSON TMNet WebConfig.
TFTP Protocol to update the firmware of the interface.
Remote printer name aux
Port number 515
Maximum Simultaneous Connections 6
Number of connections that can
print
1 (Other users must wait until the printing has completed.)
Timeout Default: 300 seconds
Can be set with EPSON TMNet WebConfig. (0 ~ 300 seconds)
Set to 0: No timeout
Job cancellation Not supported
Banner printing Not supported