Epson UB-E03 Technical Reference Guide

Chapter 4 UB-E03 Specifications
57
4
UB-E02 and UB-E03
ThecomparisontablebetweentheUB‐E02andtheUB‐E03isshownbelow.
*1:Fullgraphics/180dpi
*2:300mm/sspeedsupportedprintersonly
UB-E02 UB-E03
Basic
specification
Communication function 10Base-T, 100Base-TX
Full duplex, Half duplex, Auto duplex
Communication protocols IP, ARP, ICMP, UDP, TCP, LPR, Port9100
Automatic IP address
setting protocols
DHCP, APIPA
Status inquiry and setting
protocols
HTTP, SNMP, ENPC, TFTP
Network setting utility EPSON TMNet WinConfig, EPSON TMNet WebConfig
Auto-MDIX Not available Available
External/
environment
Size 70 mm × 58 mm
Operating conditions 0°C to 50°C/10% to 90%
Added
functions
Maximum printing speed*
1
190 mm/s 300 mm/s*
2
Low-power consumption
mode
Not available Available
Buzzer function Not available Not available
Details Socket Time Out Fixed
(300 sec.)
Changeable
(0 to 300 sec.)
OID for SNMP Trap
1.3.6.1.2.1.43.18.2 1.3.6.1.4.1.43.18.2

Epson UB-E03 Specifications

General

Brand	Epson
Model	UB-E03
Category	Control Unit
Language	English