Epson VT Series User Manual

Maintenance 7. Covers
VT Rev.1 143
7.5 Arm #4 Cover 2
CAUTION
■
Do not remove the cover
forcibly. Removing the cover forcibly may result in
damage
to the cables, disconnection, and/or contact failure. Damaged cables,
disconnection, or contact failure is extremely hazardous and may result in electric
shock and/or improper function of the robot system.
■
When installing the cover, b
e careful not to allow the cables to interfere with the
cover mounting and do
not bend these cables forcibly to push them into the
cover.
Unnecessary strain on cables may result in damage to the cables,
disconnection, and/or contact failure. Damaged cables, disconnection, or
contact failure is extremely hazardous and may result in electric shock and/or
improper function of the robot system.
When
routing the cables, observe the cable locations
after removing the cover.
Be sure to
place the cables back to their original locations.
Arm #4 Cover 2
6-M4×12 Sems

Epson VT Series Specifications

General

Brand	Epson
Model	VT Series
Category	Robotics
Language	English