Epson WF-7610 - Using the Fax Setup Wizard

Using the Fax Setup Wizard
You can set up the product's basic fax settings using the Fax Setting Wizard. This wizard is automatically
displayed when the product is turned on for the first time. You can also change these settings individually
from the Fax Settings menu.
Note: These settings can be locked by an administrator. If you cannot access or change these setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Setup.
3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Scroll down and select Fax Settings.
You see this screen:
5. Scroll down and select Fax Setting Wizard.
6. Select Start.
You a Fax Header screen like this:
163