Epson WF-7610 User Manual

If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or
damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related tasks
Cleaning the Print Head Using the Product Control Panel
Checking the Nozzles Using the Product Control Panel
Removing and Installing Ink Cartridges
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Load a few sheets of plain paper in the cassette (or in cassette 1 if your product has two cassettes).
2. Press the home button, if necessary.
3. Select Setup.
4. Select Maintenance.
5. Select Print Head Alignment.
You see this screen:
249

Epson WF-7610 Specifications

General

Max Print Resolution	4800 x 2400 dpi
Max Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
Connectivity	USB, Ethernet, Wi-Fi
Duplex Printing	Yes
Paper Capacity	250 sheets
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Display	4.3-inch color touchscreen
Print Technology	Inkjet
Max Print Size	13 x 19 inches
Scanner Type	Flatbed and ADF
Copy Speed (Color)	8.8 cpm
Print Speed (Color)	10 ppm
Copy Speed (Black)	16 cpm