• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click
Realignment. Then print another alignment sheet and check it.
Note: Click Skip (where available) if you want to skip a particular alignment sheet.
6. When you are done, click Finish.
Parent topic: Print Head Alignment
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1. Load a few sheets of plain paper in the product.
2. Press the home button, if necessary.
3. Select Setup.
4. Select Maintenance.
You see this screen:
5. Scroll down and select Paper Guide Cleaning.
6. Select the paper source if necessary.
7. Press the Color button.
8. Check the back of the ejected paper to see if it is clean.
9. Repeat as necessary until the paper comes out clean.
Parent topic: Adjusting Print Quality
252
To Next Page
Loading...
