364
LCD screen message Condition/solution
Maintenance rollers in XX is nearing
the end of its service life. .
The maintenance rollers need to be replaced periodically for
optimal performance. (Paper may not feed correctly from the
paper cassette when the maintenance roller is near the end of its
service life.)
Maintenance rollers in XX is at the
end of its service life. Replace it and
reset the maintenance roller counter
Replace the maintenance rollers.
You need to replace ink supply
unit(s).
Replace the indicated ink packs.
Paper Setup Auto Display is set to
Off. Some features such as paper
size and type settings may be
unavailable. For details, see your
documentation.
AirPrint is not available when the Paper Setup Auto Display
setting is disabled. Change Paper Setup Auto Display to On.
No dial tone detected. Make sure the phone cable is connected correctly and the
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, change the
Line Type setting to PBX. If you still cannot send a fax, turn off
the Dial Tone Detection setting. (Turning off the Dial Tone
Detection setting may cause the product to drop the first digit of
a fax number.)
Failed to receive faxes because the
fax data capacity is full. Touch the
Job/Status at the bottom of the Home
Screen for details.
Press the Job/Status button and select Printer Status and
resolve any printer errors that prevented faxes from printing.
Make sure the product is connected to a computer or that a USB
device is connected to the product.
Combination of the IP address and
the subnet mask is invalid.
There is a problem with the network connection to your product.
Set up your product on the network again.
Update the root certificate to use
cloud services.
Access the Web Config utility and update the cloud service root
certificate.
To Next Page
Loading...
