42
2 AC inlet
3 Rear cover 1 (D1)
4 Paper cassette rear covers (E)
5 Service USB port for future use (do not remove sticker)
6 USB port
7 LAN port
Note: If you are using a USB connection, make sure you insert the cable in the correct orientation.
Parent topic: Product Parts Locations
The Power Off and Sleep Timers
The product enters sleep mode or turns off automatically if it is not used for a period of time. You can
adjust the time period before power management begins, but increasing the time reduces the product's
energy efficiency.
Changing the Sleep Timer Settings
Changing the Power Off Timer Settings
Parent topic: Product Basics
Changing the Sleep Timer Settings
You can adjust the time period before your product enters sleep mode and turns off the LCD screen.
To Next Page
Loading...
