Epson WorkForce WF-2850 User Manual

154
11. On the Run Check Fax Connection screen, select Start Checking and follow the on-screen
instructions to check the fax connection and print a report of the check result. If there are any errors
reported, try the solutions on the report and run the check again.
If the Select Line Type screen appears, select the correct line type.
If the Select Dial Tone Detection screen appears, select Disable. However, disabling the dial tone
detection function may drop the first digit of a fax number and send the fax to the wrong number.
Parent topic: Setting Up Basic Fax Features
Related references
Entering Characters on the LCD Screen
Selecting the Line Type
If you connect the product to a PBX phone system or terminal adapter, you must change the product's
line type. PBX (Private Branch Exchange) is used in office environments where an external access code
such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched
Telephone Network), which is a standard home phone line.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Fax Settings > Basic Settings > Line Type > PBX.
You see a screen like this:
3. Set the switch to Use to activate the setting.
4. Select Access Code.
5. Use the displayed keypad to enter the access code, such as 9, and select OK.

Epson WorkForce WF-2850 Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 optimized dpi
Scan Resolution	1200 x 2400 dpi
Automatic Document Feeder	Yes
Duplex Printing	Manual
Functions	Print, Copy, Scan, Fax
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Display	2.4" Color LCD
Input Paper Capacity	100 sheets
ADF Capacity	30 sheets
Fax Memory	Up to 100 pages
Fax Speed	33.6 Kbps
Scanner Type	Flatbed
Copy Speed (Color)	4 cpm
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Maximum Black Print Speed	10 ppm
Maximum Color Print Speed	5 ppm
Paper Sizes Supported	Letter, Legal
Ink Cartridges	Black, Cyan, Magenta, Yellow