Epson WorkForce WF-2850 User Manual

43
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software by downloading it from the Epson website. The installer program guides you
through network setup.
Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your fax and network data and settings.
1. Press the home button, if necessary.
2. Select the icon.
You see a screen like this:
3. Select Wi-Fi (Recommended).
4. Select Start Setup or Change Settings.
5. Select Wi-Fi Setup Wizard.
6. Select the name of your wireless network or select Enter Manually to enter the name manually. Use
the displayed keypad to enter your network name.

Epson WorkForce WF-2850 Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 optimized dpi
Scan Resolution	1200 x 2400 dpi
Automatic Document Feeder	Yes
Duplex Printing	Manual
Functions	Print, Copy, Scan, Fax
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Display	2.4" Color LCD
Input Paper Capacity	100 sheets
ADF Capacity	30 sheets
Fax Memory	Up to 100 pages
Fax Speed	33.6 Kbps
Scanner Type	Flatbed
Copy Speed (Color)	4 cpm
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Maximum Black Print Speed	10 ppm
Maximum Color Print Speed	5 ppm
Paper Sizes Supported	Letter, Legal
Ink Cartridges	Black, Cyan, Magenta, Yellow