219
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the home button, if necessary.
4. Select Maintenance > Print Head Alignment .
You see a screen like this:
5. Select one of the following options:
• Vertical Alignment if your printout is blurry.
• Horizontal Alignment if your printout contains horizontal banding.
6. Follow the on-screen instructions to print an alignment sheet.
Note: Do not cancel printing while you are printing head alignment patterns.
7. Check the printed patterns on the alignment sheet and select the following on the LCD screen,
depending on the alignment pattern you printed:
• Vertical Alignment: For each pattern, select the number representing the pattern with the least
amount of separation or overlap.
To Next Page
Loading...
