62
• Load one sheet of loose-leaf or other paper with holes as shown.
Note: Do not select automatic 2-sided printing for this type of paper and do not print over the
holes. Select Letterhead as the paper type setting.
Note: To load a sheet of paper longer than legal-size, store the rear feed paper support and insert
the paper into the rear feed as shown.
4. Slide the edge guides against the paper, but not too tightly.
Note: Make sure the paper fits under the line indicated by the triangle mark inside the edge guides.
5. Select the size and type of the paper you loaded on the LCD screen and select Close.
To Next Page
Loading...
