EasyManua.ls Logo

Epson Workforce WF-2860

Epson Workforce WF-2860
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
291
Frequency range 2.4 GHz
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Ethernet
Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
Twisted Pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
Security Protocol
SSL/TLS
HTTPS Server/Client, IPPS
Parent topic: Technical Specifications
Safety and Approvals Specifications
United States Safety: UL60950-1
EMC: FCC part 15 Subpart B class B
Canada Safety: CAN/CSA C22.2 No. 60950-1
EMC: CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module:
Manufacturer: Askey Computer Corporation.
Type: WLU6320-D69 (RoHS)
This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended

Table of Contents

Related product manuals