71
Paper Source
Settings option
Available settings Description
Paper Source
Settings
Paper Setting Select the paper size and type for each paper source
A4/Letter Auto
Switching
Select On to switch the selected paper size to match the
loaded paper (Letter or A4) if the wrong size is selected
Error Notice Select On for either of the available settings to display an
error message when the selected paper type or size does
not match the loaded paper
Paper Setup Auto
Display
Select On to automatically display a menu that lets you
select the paper size and type when you load paper in the
product
Note: If this setting is disabled, you cannot print using
AirPrint.
Universal Print
Settings
Top Offset Adjust the top or left margin
Left Offset
Top Offset in Back Adjust the top or left margin of the back page when printing
double-sided
Left Offset in Back
Check Paper Width Select On to check the paper width before printing. This
prevents printing beyond the edges of the paper when the
paper size settings are incorrect, but may reduce the
printing speed.
Skip Blank Page Select On to skip printing of blank pages automatically
Auto Error
Solver
On Selects an action to perform when a 2-sided printing error or
a memory full error occurs.
Select On to display a warning and print single-sided when
a 2-sided printing error occurs, or to print only what the
printer could process when a memory full error occurs.
Select Off to display an error message and stop printing if
an error occurs.
Off
Quiet Mode On Select On to reduce noise during printing. (Printing speed
may be reduced.)
Off
To Next Page
Loading...
