Epygi QX series Administrator's Guide

QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x) 140
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
Parameter System Default Value
SIP Server Registration – disabled
Extension Settings – SIP Advanced
Authentication User Name – undefined
Send Keep-alive Messages to Proxy – disabled
RTP Priority Level – medium
Do Not use SIP Old Hold Method - disabled
Outbound Proxy, Secondary SIP Server and Outbound Proxy for Secondary SIP Server –
undefined
Extension Settings – Voice Mailbox
(for QXFXS24 gateways)
External Voice Mail for all extensions
Extension Settings – Codecs
Codecs - G711u (preferred), G711a, G729a, G726/32, G726/16, G726/24, G726/40,
iLBC– enabled,
H.263,H.263+ and H.264 – disabled
Out of Band DTMF Transport – enabled
T.38 FAX – enabled
Pass Through FAX – enabled
Pass Through Modem – disabled
Force Self Codecs Preference for Inbound Calls – disabled
SRTP Policy – Make unsecure calls, accept anything
Attendant 00 Settings – General
(for QXFXO4, QXISDN4 and QXE1T1
gateways)
Display name – empty
Enable FAX forwarding – disabled
Show on Public Directory – enabled
Attendant 00 Settings – Attendant
Scenario
(for QXFXO4, QXISDN4 and QXE1T1
gateways)
Scenario – default
Send AA digits to Routing Table – disabled
Redirection on Timeout – disabled
ZeroOut – disabled
Welcome Message – enabled
Ringing Announcement – disabled
Welcome Message, Recurring Attendant Prompt and Attendant Ringing Announcement
– default
Attendant 00 Settings – SIP
(for QXFXO4, QXISDN4 and QXE1T1
gateways)
Registration User Name/DID Number – empty
Registration password - empty
SIP server - empty
SIP Server port – 5060
SIP Server Registration – disabled
Attendant 00 Settings – SIP Advanced
(for QXFXO4, QXISDN4 and QXE1T1
gateways)
Same as for extensions
Attendant 00 Settings – Codecs
(for QXFXO4, QXISDN4 and QXE1T1
gateways)
Codecs - G711u (preferred), G711a, G726/16, G726/24, G726/32, G726/40, G729a,
iLBC – enabled,
H.263, H263+ and H.264 – disabled
Out of Band DTMF Transport – enabled
T.38 FAX – enabled
Pass Through FAX – enabled
Pass Through Modem – disabled
Force Self Codecs Preference for Inbound Calls – disabled
SRTP Policy – Make unsecure calls, accept anything
Universal Extension Recordings
Default, Percentage of System Memory – 1%
Authorized Phones
No entries
General Operation Mode
(for QXFXS24 gateways)
Stand-alone mode
FXS (On-board) settings
24 FXS Lines exists on QXFXS24
Onboard Lines Configuration:
CallerID – Standard 2 FSK for all lines
Ringer type: Type A for all lines
Busy Tone and Power Disconnect indications: disabled for all lines

Epygi QX series Specifications

General

Brand	Epygi
Model	QX series
Category	PBX
Language	English