Epygi QX series Administrator's Guide

QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x) 59
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
This page provides selection between
Typical
and
Custom
date/time
rule definitions.
The Typical selection contains the following group of radio buttons that
are used to select the frequency of the corresponding routing pattern that
is to take place:
• Daily
• Weekly – the preferred weekday(s) should be selected for this
option.
• Monthly – the calendar day should be selected for this option.
• Annually – the calendar day and month should be selected for this
option.
In the Available Time Period drop down lists, the time range of the
pattern validation should be defined. Any time selected in this field will
be considered corresponding to the QX gateway
Date and Time Settings.
The Custom selection provides the option to manually define the validity
period(s). Use the following format to insert pattern date/time rule(s):
[Month,Month-Month,...][Day-Day,Day,...][hh:mm-hh:mm,...]; ...
Fig.II- 70: Call Routing Wizard – Date/Time Rules – Add Entry page
The
Call Routing Wizard
–
Routing Overall Call Limitation Settings -
Edit Entry
page appears if the
Set Calling Time Limit
checkbox
previously had been enabled on Page 1 and allows to define the available
duration of the calls with the selected routing rule as well as to specify
the Expiration/Renewal Date for the available calls duration.
The Routing Overall Call Limitation Settings - Edit Entry page consists
of the following components:
• The Available Calls Duration text field requires the maximum
available duration of the calls (in minutes) placed with the selected
routing rule. Once the Available Calls Duration reaches the value
defined here, the current call will be disconnected without prior
notice and no new call will be possible until this field is updated.
• The Expiration/Renewal Date settings are used to configure
the Expiration Date and Renewal Amount of the Available Calls
Duration. Expiration/Renewal Date field provides selection
between Periodic and Specific Date.
o The Periodic selection is used to define the expiration
date of the allocated
Available Calls Duration
for the
selected routing rule and has the following options:
Fig.II- 71: Call Routing Wizard – Routing Call Limitation Settings - Edit Entry page
• Daily
• Weekly- the preferred week start day should be selected for this option.
• Monthly - the calendar day should be selected for this option.
o The Renewal Amount text field requires the renewal amount (in minutes) to be added to the Available Calls Duration when the
expiration date of the Available Calls Duration is reached.
o The Discard remainder before renewal option selection allows to discard the remainder of Available Calls Duration before renewal
and set the Renewal Amount as an available calls duration.
o The Specific Date selection provides a possibility to manually define the expiration date allocated for the Available Calls Duration for
the selected routing rule. When the Specific Date expires, the selected routing rule becomes unavailable automatically and no new call
will be possible until this field is updated.

Epygi QX series Specifications

General

Brand	Epygi
Model	QX series
Category	PBX
Language	English