Epygi QX50 User Manual

QX50/QX200/QX2000; (SW Version 6.0.x) 31
QX50/QX200/QX2000 Manual II: Administrator’s Guide
changed to Passed and a Reactivate button appears. Using Reactivate button you might re-enable the Voice Mail Configuration Wizard so the
user will be again prompted about his/her personal settings next time entering his/her Voice Mailbox.
Instructions on how to insert the information prompted in the Voice Mailbox Settings are available in the Features Codes (see Manual III –
Extension’s Users Guide).
The Shared Mailbox section is used to setup a mailbox sharing. The Edit Voice Mailbox Access List link goes to the page where a list of PBX
extensions can be defined for which the mailbox of the current extension will be shared and accessible without password authentication. For more
details on how to access Shared Mailboxes, see Feature Codes.
• Use External Voice Mail
– enables the Voice Mail service for
the corresponding extension and is used to define a remote
Voice Mail Server as a location for the Voice Mails. In this
case recorded voice mails will be collected on the remote
server. Radio button selection enables a sub-
group of
manipulation radio buttons:
• If the remote Voice Mail Server is combined with the
SIP Proxy server, it is recommended to select Proxy
Controlled Mailbox Type. With this selection, SIP
proxy will keep the recorded voice mail on itself.
When extension accesses his mailbox by dialing *0,
the call will be redirected to the voice mailbox on the
proxy server.
• If the remote Voice Mail Server acts as a standalone
location of voice mails, it is recommended to select
Independent Mailbox Type. With this selection, QX
IP PBX redirects the recorded voice mails to the
defined remote Voice Mail server. When extension
accesses his mailbox by dialing *0, the call will be
redirected to the remote voice mail server.
For each of these selections, it is required to enter the SIP URI of
the Voice Mail Server where voice mails of the corresponding
extension will be collected.
The Transport Protocol for SIP messages radio buttons allow
the transport protocol (UDP or TCP) for transmission of SIP
messages to be selected.
Fig.II- 37: Extensions Management - Edit Entry – Voice Mailbox Settings page
• With MS Exchange Server you can keep recorded voice messages into one universal inbox.
o UM Auto Attendant URI text field requires the SIP URI of the MS Exchange Server. When extension accesses his mailbox by dialing
*0, the call will be redirected to the voice mailbox on the MS Exchange Server.
o UM Extension text field requires an extension number that Unified Messaging will use when voice mail is submitted to the user's
MS Exchange Server mailbox.
Please Note: When the MS Exchange Server option is selected as an external voice mail server, the transport protocol TCP is automatically used
regardless of the Transport Protocol for SIP messages radio button selection.
Attention: By choosing the Use External Voice Mail option, some internal voice mailbox services may become unavailable. Instead, the services of the
external voice mail server will become available to the user. Please consult with the external voice mail server administrator before enabling this option.

Epygi QX50 Specifications

General

Brand	Epygi
Model	QX50
Category	Network Hardware
Language	English