17
3. Avoid facing towards glass windows or doors
4. Avoid facing or positioning close to a heat source
5. Avoid facing towards moving items
Movement such as that of curtains
where there may be a draft from an
open window could result in false
triggering a Sensor.
if there are two sensors covering the
same detection area, adjust the
locations to prevent cross-interference.
Detection sensitivity can be affected by
movement outside of a window/glass
door, etc., that falls within the detection
range, such as a flow of traffic (vehicles,
people, etc).
This includes: heat extraction units,
heaters, air conditioning units,
microwave oven, refrigerator, freezer,
etc., all of which may cause false
triggering of the Sensor.
O
N
To Next Page
Loading...
