ERA Invincible - Remote Phone Control

31
Remote Phone Control
Users can operate the system remotely. To adjust the number of rings after which
Remote Phone Control operation will be activated:
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Ringing Times”, press .[ ] [ ] [Enter]
Input 5~9 for number of rings to be made, press .[Enter]
The Default setting is 5 rings.
Alarm Message
A 10-second voice message can be recorded that plays when the Control Panel calls
out to a user's stored phone numbers. The voice message will be repeatedly played to
notify of intrusion.
Record Alarm Message
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Alarm Message”, press .[ ] [ ] [Enter]
Press or , choose “Record”, press . [ ] [ ] [Enter]
The LCD screen will display “Record 10s Voice”, press .[Enter]
Voice recording will stop automatically after 10s or. To stop the recording before the
10s expiry time, press . [Enter]
Siren Setup
External Sirens (if added to the system) and the built-in siren can be set to beep when
armed and/or disarmed. The ringing duration can be set between 0 and 300 secs.
See the end of this section for ‘Set Ringing Time for all Sirens’
Wired Siren
Wired Siren (a Siren that is wired into the Control Panel).
Turn On/Off a Wired Siren (Optional Accessory)
Log into the menu, press or , choose “System Settings”, press .[ ] [ ] [Enter]
Press or , choose “Siren Setup”, press . [ ] [ ] [Enter]
Press or , choose “Wired Siren”, press .[ ] [ ] [Enter]
Press or , choose “Siren On/Off”, press .[ ] [ ] [Enter]
Press or , choose “On” or “Off”, press [ ] [ ] [Enter].
“On” is to turn on the wired siren; “Off” is to turn off the wired siren.
The default setting is “On”
1
2
3
1
2
3
4
5
1
2
3
4
5