How to use this device
62/96
Component Interval Activity See page
When necessary
300 Operating hours
500 Operating hours
800 Operating hours
1000 Operating hours
3000 Operating hours
8 Starter,
low pressure lamps canopy
X Replace 71
9 Starter,
low pressure lamps facial tanner
X Replace 71
8 Filter mats X Replace 75
10, 11 Filter X Replace 71
12 Filter mat X Replace 71
13 Filter mats X Replace 75
Maintenance performed by authorized, trained and qualified staff
WARNING!
Danger to persons from maintenance work that has not
been carried out!
If maintenance work is not carried out, it can lead to material
damage or personal injuries!
– Maintenance work ma
onl
be carried out b
personnel
who have been authorized, trained and qualified by JK
Products & Services, Inc.!
– The operator is responsible for compliance with the
maintenance intervals!
The maintenance work must be carried out in accordance with checklist
1018814-.. by a JK Factory Certified Technician at the manufacturer or by
personnel who have been authorized, trained and qualified by the manufac-
turer.
The correctly carried out maintenance work must be entered and confirmed in
checklist 1018814-...
The maintenance work must be carried out at the following intervals:
Every 1500 operating hours
Annually or every 2000 operating hours, whichever is sooner.
After 5000 operating hours
After 10 years or 20,000 operating hours, whichever is sooner.
Once the age of the device reaches ten (10) years from the date of manufac-
ture, its condition must be assessed by a (level 4) JK Factory Certified Tech-
nician before use of the device can be continued.
Failure to have this device assessment performed may result in personal
injury or property damage.
Any liability is excluded if use of the device continues ten (10) years after the
date of manufacture, without the "condition assessment" having been per-
formed.
To Next Page
Loading...
