ergoline ers2 - Adapter

3 Components
ers2 – 1-Channel ECG Telemetry System 27
201000401000 / Rev 04
Back
3.5 Adapter
Intended use
The adapter is used to conduct the ECG signal via two ECG leadwires connected to commercially
available ECG monitoring electrodes from the surface of the skin to the attached ergoline 1-chan-
nel transmitter. The adapter is intended for use on intact skin of adult patients for an extended
period of time.
It is used for ECG monitoring in rehabilitation programs. The device is non-critical and supplied
non-sterile. This means it may be reused on the same patient if cleaned and disinfected accord-
ing to instructions.
The adapter has two ECG leadwires integrated into the cradle. The cradle is attached to the
1-channel transmitter by means of snap fasteners. The patient wears the adapter on a neckband
whose length can be adjusted with the cord stopper.
The adapter is a type CF, defibrillation-proof applied part.
Product Description
1
6
2
4
5
3
5
Cradle
Neckband guides
Cord stopper for length adjustment
ECG leadwires
ECG connections
(snap fasteners for connection to ECG electrode)
Snap fastener interface in cradle for
connection to the 1-channel transmitter
1
2
3
4
5
6