5 Attaching the ECG System to the Patient
38 |
38
201000401000 / Rev 04
5.3.4 Removing the Adapter with the 1-Channel Transmitter from the Patient
• Carefully disconnect the leadwires from the ECG electrodes.
• Remove the adapter with the 1-channel transmitter from the patient.
• Carefully remove the ECG electrodes from the patient following the manufacturer's instructions.
• Remove the 1-channel transmitter from the adapter by holding the adapter with one hand and
the 1-channel transmitter with the other hand and detaching it horizontally from the snap
fasteners integrated in the cradle.
To Next Page
Loading...
Need help?
General