Installation Data Handling
25.2.3 Functions Involving RBS Database
The RBS database provides a number of functions to access the
database, as follows:
• Read/Install RBS Database:
− The entire RBS database can be read or written. This
function is used to transfer the RBS database between the
OMT and the RBS.
• Read Hardware Information:
− This function allows the BSC to read details of the
hardware installed in the RBS, specifically:
− Product number
− Revision
− Serial number
− Placement information
• Read one Information Element:
− This function allows the BTS to read different
information elements in the RBS and RU databases.
• Update one Information Element:
− This function allows the BTS to write information
elements in the RBS and RU databases.
25.3 Operational Conditions
25.3.1 Operation and Maintenance
Maintenance functions related to Installation Data Handling are
described in chapter Operation and Maintenance Terminal.
25.3.2 Capabilities
• Read of the entire RBS database (from the RBS to the OMT)
takes less than 4 minutes.
• Installation of the entire RBS database (copy from the OMT to
the RBS) takes less than 4 minutes.
EN/LZT 123 2697 R5A
1998-08-13
161 (306)
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
