Product Specification for Power and Battery Cabinet
AC Mains to PBC
–48 V to link equipment
–48 V and Data to AAU in the same port
two ports 24 V to RBS
alarm port from second PBC
binary alarms to the RBS
The Interface Box also contains surge
protection devices on all external
terminals. The internal interface is
designed so that it is possible to remove
the surge protection devices and install an
optional reinforced surge device.
Mounting Base The Mounting Base serves as a base for
the Battery Cabinet.
Sun-shield The Sun-shields protect the PBC from
sun, wind, rain and snow.
6.4 Configurations
6.4.1 Options
Options are configurations that require additional hardware.
Appearance
The following optional colours are available for the sun-shields besides
the standard colour.
NCS S2010-B70G (Olive green)
NCS S1020-R70B (Sky blue)
NCS S1020-Y90R (Brick red)
NCS S1020-Y50R (Brown)
NCS S1020-Y10R (Yellow)
According to NCS standard.
6.4.2 Variants
Enhanced Lightning Protection
To protect the PBC from lightening it is possible to order an Enhanced
Lightning Protection.
EN/LZT 123 2697 R5A
1998-08-13
75 (306)
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
