Product Specification for RBS 2302
Indicators (LEDs)
Fault One or more faults, equals BS fault.
Operational At least one TRX operational.
Local mode RBS in local mode.
Reduced capacity One of two TRXs operational.
Test TRX1 Result from TRX1 test operation.
Test TRX2 Result from TRX2 test operation.
AC Power on AC Power is switched on to RBS.
Battery fault Lowbattery DC voltage, battery absent.
External alarm One or more external alarm active.
Buttons
CPU reset
Local/remote mode
Test Operation
initiation
Switches
Battery connected/not connected
AC Mains connected/not connected
Barcode Sign
The barcode sign for product identification is readable without disturbing
the RBS function.
5.8 Product Requirements
5.8.1 Appearance
Ericsson products are designed to appear as one physical unit,
inconspicuous, pleasant and good-looking. The standard colour of the
RBS is Grey.
The front cover of the RBS which is designed as a sun-shield is
available in different colours to make the RBS even more inconspicuous.
There is an optional integrated antenna system which supports the idea
of the RBS and the antenna site as one unit.
5.8.2 Mechanical Structure
Replaceable Units
The RBS consists of the following replaceable units:
• Cabinet
EN/LZT 123 2697 R5A
1998-08-13
65 (306)
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
