Product Specification for RBS 2302
• Mounting base
• Installation box door
• Integral antennas
• Sun-shield
• Batteries
• AC-filter board (including overvoltage protection)
• Transmission filter board (including overvoltage protection)
• Wall bracket
• Mast/pole fixture
• Connection board
Labels
All signs are placed to fulfil the requirements behind the purpose and
reason for the signs. And all signs that are needed for identification of
the product and its compliance are readable without disturbing the RBS
function.
Locks
The installation box door is equipped with a lock which can be
exchanged if neccesary.
5.8.3 Dimension and Weight
Volume
The total volume of a complete RBS site without cabling, is less than
35 l.
Size
(HxWxD): 535x408x160 mm. (without integral antennas).
(HxWxD): 535x408x210 mm. (with Sector Antenna).
(HxWxD): 607x408x160 mm. (with Omnidirectional Antenna).
Weight
The total weight is the sum of the following units:
Cabinet 18 kg (incl. Internal battery)
Mounting Base 8 kg (incl. Sun-shield)
Wall bracket 5 kg (incl. Pole fixture)
Total weight 31 kg
66 (306)
EN/LZT 123 2697 R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
