Product Specification for Power and Battery Cabinet
The base colour of the PBC is Grey, but it is possible to order the front
sun-shields in different colours, which can make the PBC more discrete
depending on the environmental surroundings.
The PBC is built up by the following main physical units: Battery
Cabinet, Sun-shields, Lid and Mounting Base where Installation Box
and Interface Box are included. This will support a routine of installing
the Mounting Base prior to the Cabinet arrival.
The PBC has the same width and length as the micro RBS but the rear
sun-shield is modified to achieve the additional volume needed to fit the
batteries.
6.3 Product Architecture
6.3.1 Main Physical Units
P003439A
Front sunshield
Upper sunshield
Left sunshield
Lower sunshield
Mounting base
Battery
Cabinet
Interface box
Installation box
Figure 29 Main Physical Units
BC Battery Cabinet
The BC contains a AC/DC converter and
batteries for DC-backup. The batteries are
replaceable without disturbing traffic
handling.
Installation Box The Installation Box contains the
MMI-area.
Interface Box The Interface Box contains all ports to
external equipment as follows:
74 (306)
EN/LZT 123 2697 R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
