Power Supply
30.4.2 Capabilities
Central AC-DC Conversion
Table 19 Electrical data at 50 Hz
AC input single-phase
voltage: (2-wire; earthed
end of phase) (2-wire;
impedance grounded
(earthed) neutral)
Nominal 200 V- 250 V
Tolerance ±10%
Non-destruction range: (phase voltage)
Permanent 0 V- 280 V
Overvoltage < 10 ms 280 V- 300 V
AC input frequency Nominal 50 Hz
Tolerance ±10%
AC input current Inrush current (total, all phases) Cabinet dependent
Short circuit current Cabinet dependent
EN/LZT 123 2697 R5A
1998-08-13
181 (306)
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
