Product Specification for RBS 2301
4.7.2 Mechanical Structure
Replaceable Units
The RBS consists of the following replaceable units:
• Cabinet
• Mounting base
• Integral antennas
• Sun-shield
• Batteries
• Connection unit
• Wall fixture
• Mast/pole fixture
Labels
All signs are placed to fulfil the requirements behind the purpose and
reason for the signs. And all signs that are needed for identification of
the product and its compliance are readable without disturbing the RBS
function.
4.7.3 Dimension and Weight
Volume
The total volume of a complete RBS site without cabling, 33 l.
Size
(HxWxD): 535x408x160 mm. (without integral antennas).
(HxWxD): 535x408x210 mm. (with Sector Antenna).
(HxWxD): 607x408x160 mm. (with Omnidirectional Antenna).
Weight
The total weight is the sum of the following handling units:
Cabinet 18 kg (incl. internal battery)
Mounting Base 6.5 kg (incl. Sun-shield)
Wall bracket 3 kg
Omni Antenna 0.5 kg
Sector Antenna 2 kg
Total Weight 30 kg
(A temporary lifting device can be attached during installation.)
EN/LZT 123 2697 R5A
1998-08-13
47 (306)
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
