Ericsson TANDBERG Television iPlex N20001 - Page 41

iPlex Installation and Hardware Specification Guide
41
The RTME Plus components seen from the front are as follows: Audio Connec-
tor, S-Video In (chrominance “C”) or Composite Video In (V2), activity LEDs
(ready and active), and S-Video In (luminance “L”) or Composite Video In (V1) or
SDI.
Specifications Mechanical
Height: 0.509 inches
Width: 2.913 inches
Depth: 5.866 inches
Connectors: 37 Pin Micro-D Connector, BNC
TIP The Advanced Encoder can
be distinguished from the RTME
Plus by the presence of green
bands around the BNC
connectors.
A
U
D
I
O
MPEG-2 ENC
CI/Y/SDI
C2/C
RDY ACT
A
U
D
I
O
MPEG-2 ENC
CI/Y/SDI
C2/C
RDY ACT
Audio In
Composite Video In
2
Activity LEDs
Serial Digital Interfa
ce
Composite Video In
1