68
iPlex Installation and Hardware Specification Guide
Removing a GE SFP Module
To remove a GE SFP module:
1
Remove the cable
2
Unlock the bail lock
3
Slide the SFP module out.
4
Replace any dust caps and store properly.
Replacing the Backup Battery
The battery on the iPlex system board powers a Real-Time Clock (RTC) for up to
10 years in the absence of power. When the battery starts to weaken, it loses volt-
age and the iPlex may lose its time clock.
CONTROL
REDUNDANCY
CONSOLE
A
L
A
RM
100/240 VAC
~
6A
GE1
GE2
CONTROL
REDUNDANCY
CONSOLE
A
L
A
RM
100/240 VAC
~
6A
GE1
GE2
To Next Page
Loading...
