Ericsson TANDBERG Television iPlex N20001 - Iplex Login; Cli

iPlex Installation and Hardware Specification Guide
83
iPlex Login
Accessing the Tandberg iPlex happens in one of two ways. You can use the com-
mand-line interface (CLI) through HyperTerminal or telnet via the Ethernet inter-
face or the iPlex Management Console. The following sections walk you through
the logon processes for the CLI and iPlex Management Console (MPMC).
CLI If an Ethernet or a Web GUI connection is not available, you can configure the
Tandberg iPlex with the Command Line Interface (CLI) using the management
PC.
TIP It is recommended that only
users familiar with the CLI format
use the Command Line Interface.
Start Telnet from the management PC.
1 Click the Windows Start button.
2 Click Run .
3 In the Open box, type: telnet xxx.xxx.xxx.xxx
(the IP Address of the iPlex you are connecting to)
4 Click OK .
5 Type at iplex login: <user name>
6 Type at Password: <set by administrator>