Ericsson TANDBERG Television iPlex N20001 - Installing the GE SFP Module

iPlex Installation and Hardware Specification Guide
67
Installing the GE SFP Module
To install the GE SFP module:
1 Orient the SFP module with the module edge connector in the down position.
2 Slide the SFP module until it engages with the SFP connector on the iPlex.
3 Close the bail lock to retain the SFP properly.
4 The module is ready to be connected to its appropriate cable
CONTROL
REDUNDANCY
CONSOLE
A
L
A
RM
100/240 VAC
~
6A
GE1
GE2
CONTROL
REDUNDANCY
CONSOLE
A
L
A
RM
100/240 VAC
~
6A
GE1
GE2