iPlex Installation and Hardware Specification Guide
87
Creating a VLAN The VLAN Configuration page allows you to configure a VLAN Setup. After
entering values, use the Add button to create a new route or use the Delete button
in conjunction with the Delete check box to remove entries. After completing the
configuration, click the Apply button.
Configuring an
ASIOut
If you have an ASIOut submodule then you can route programs through it. Click
the ASIOut port from the Home page and you will see the current statistics. How-
ever, to confiOut port that you want to configure. After completing the configura-
tion, click the Apply button.
To configure your specific setup, you will have to go to the iPlex User’s Guide or
use Help
To Next Page
Loading...
