iPlex Installation and Hardware Specification Guide
45
Indicators
RDY—Ready Green LED
ACT—Active Green LED
SD Interface
•
The SD interface option provides two BNCs for uncompressed analog or digital
video input. These two BNCs can be configured in software to be two
composite inputs, one S-Video input, or one SD-SDI input. The SD interface
option also includes the audio interface, which is identical to that of the HD
interface.
State RDY ACT
Power Off or Not Initialized Off Off
MPEG Encoder enabled, no video present on selected
input.
On Off
MPEG Encoder enabled, video present on selected
input.
On Flashes
NOTE
Any analog video input to the card must be time-base stable and
any inputs coming directly from any kind of VTR (such as ½” con-
sumer VCRs) will show as very unstable inputs without the use of a
time-base corrector/frame synchronizer.
To Next Page
Loading...
