48
iPlex Installation and Hardware Specification Guide
SD Single-slot
Encoder
The Single-slot SD encoder option provides two BNCs for uncompressed analog
or digital video input. These two BNCs can be configured in software to be two
composite inputs, one S-Video input, or one SDI input. The SD encoder also
includes the audio interface, which is identical to that of the HD encoder.
Specifications
Mechanical
Height: 0.509 inches
Width: 2.913 inches
Depth: 6.015 inches
Connectors: 37 Pin Micro-D Connector, BNC
Indicators
RDY—Ready Green LED
ACT—Active Green LED
State RDY ACT
Power Off or Not Initialized Off Off
MPEG Encoder enabled, no video present on selected
input: C2/C or C1/Y/SDI
On Off
MPEG Encoder enabled, video present on selected
input: C2/C or C1/Y/SDI
On Flashes
To Next Page
Loading...
