To Next PageTo Next Page
Need help?Do you have a question about the ESAB Mig C420 and is the answer not in the manual?
General| Number of Phases | 3 |
|---|---|
| Frequency | 50/60 Hz |
| Output Current Range | 30-420 A |
| Enclosure Class | IP23 |
| Wire Diameter Range | 0.8 - 1.6 mm |
| Type | MIG |
| Duty Cycle | 60 % at 420 A |
| MIG Welding Output at 60% Duty Cycle | 420A |
Formal statement of compliance with EU directives and standards for the ESABMig C420.
Essential safety practices for users and operators of ESAB welding equipment.
Covers electric shock, fumes, arc rays, fire, noise, malfunction, and general safety advice.
Details the standard equipment supplied with the ESABMig C420 welding power source.
Explains technical specifications like duty cycle, enclosure class, and application classification.
Covers industrial use warnings, lifting, placement, assembly, and wheel positioning.
Details the procedures for connecting the welding unit to the electrical supply.
Instructions for correctly connecting the unit to the mains power supply and fuse protection.
Highlights risks from rotating parts and potential tipping hazards during operation.
Identifies and explains the various connection ports and control elements on the machine.
Details the operation of key machine functions like Start, Overheating, Water, and Flow Guard.
Covers manual control and operation details for the C420w/C420 model.
Details standard and synergy control modes for the C420sw/C420s model.
Procedures for routine inspection and cleaning of the power source and welding gun.
Guidance on maintaining the correct coolant level for water-cooled systems.
