ESAB PEH4.0 User Manual

-- 6 --
fzb2d1ea
From 00.04.04
PEH program (Flash, IC 15) 486471880
PEH 3.1
DCDUO program (Prom, IC304) 68S07001A02
CHKSUM 0221
Dat. 1998.04.04
One software version for all applications (Tractors and C&B).
From 02.11.15
PEH program (Flash, IC 15) 486471880
PEH 4.0
PEH program, China (Flash, IC 15) 486471881
PEH 4.0C
DCDUO program (Prom, IC304) 68S07001A02
CHKSUM 0221
Dat. 1998.04.04
Gauging process added.
Complete support for Weldoc. (Not in the Chinese version)
Added new languages. (In the Chinese version only English and Chinese can be selected)
Safer bus communication.
Calibration function. (Not in the Chinese version)
The following must be used: LAF/TAF version 4.0, digio 4.0, and Analogue Motor node 4.0.
From 03.04.14
PEH program (Flash, IC 15) 486471880
PEH 4.01
PEH program, China (Flash, IC 15) 486471881
PEH 4.01C
DCDUO program (Prom, IC304) 68S07001A02
CHKSUM 0221
Dat. 1998.04.04
Bug fixes, for example tandem welding.
The following software version (or higher) must be used LAF/TAF 4.0, digio 4.0 and Analogue Motor
node 4.0.
From 04.01.01
PEH program (Flash, IC 15) 486471880
PEH 4.2
PEH program China (Flash, IC 15) 486471881
PEH 4.2C
DCDUO program (Prom, IC304) 68S07001A02
CHKSUM 0221
Dat. 1998.04.04
Added wire creep speed menu.
New product code.
Added Russian language (Not in China version).
New motor selection for parallel driving.
New alarm codes.
Increased maximum speed for motor vec4000.
Bug fixes
.
The following software version (or higher) must be used LAF/TAF 4.0, digio 4.0 and Analogue Motor
node 4.0.
GB

ESAB PEH4.0 Specifications

General

Brand	ESAB
Model	PEH4.0
Category	Controller
Language	English