ESAB PEH4.0 User Manual

-- 7 --
fzb2d1ea
From 05.01.01
PEH program (Flash, IC 15) 486471880
PEH 4.3
PEH program China (Flash, IC 15) 486471881
PEH 4.3C
DCDUO program (Prom, IC304) 68S07001A02
CHKSUM 0221
Dat. 1998.04.04
Added wire creep speed menu. (Valid for the chinese version)
Added Polish language (Not in China version).
Error log, permanent memory
.
The following software version (or higher) must be used LAF/TAF 4.0, digio 4.0 and Analogue Motor
node 4.0.
From 06.10.01
PEH program (Flash, IC 15) 486471880
PEH 5.0
PEH program china (Flash, IC 15) 486471881
PEH 5.0C
DCDUO program (Prom, IC304) **************
CHKSUM 0221
Dat. 1998.04.04
Improved functions for tandem welding. Possible to restart master.
Possible to use craterfill and stopsequense together.
From 07.02.19
PEH program (Flash, IC 15) 486471880
PEH 5.1
PEH program china (Flash, IC 15) 486471881
PEH 5.1C
DCDUO program (Prom, IC304) **************
CHKSUM 0221
Dat. 1998.04.04
Bug fix Limit switch
GB

ESAB PEH4.0 Specifications

General

Brand	ESAB
Model	PEH4.0
Category	Controller
Language	English