ESAB RobustFeed AVS - Technical Data

3  TECHNICAL DATA
0446 680 001
- 12 -
© ESAB AB 2021
3 TECHNICAL DATA
RobustFeedAVS, Valid from serial no. OP139YY-XXXXXX
Power Supply voltage 15-100 VDC
Maximum weld voltage 45 VDC
Power requirement 194 VA
Rated supply current I
1
4.3 A
Settings data:
Wire feed speed 32–984 in./min (0.8–25.0 m/min)
Torch connection EURO, Tweco 4
Max. diameter wire bobbin 12 in. (300 mm)
Wire dimension:
Fe 0.6 - 2 mm (0.023 - 0.078 in.)
SS wire 0.6 - 1.6 mm (0.023 - 0.062 in.)
Cored wire 0.9 - 2.4 mm (0.035 - 0.093 in.)
Weight
RobustFeed AVS CSA, W/O flowmeter with
Tweco connector 40.1 lb (18.2 kg)
RobustFeed AVS CSA, with flowmeter with
Tweco connector 40.5 lb (18.4 kg)
Maximum weight wire spool 44.1 lb. (20.0 kg)
Dimensions (l×w×h) RobustFeed AVS 23.4×9.8×16.9in. (595×250×430mm)
Operating temperature -4 to +131°F (-20 to +55°C)
Transport and storage temperature -40 to +176°F (-40 to +80°C)
Shielding gas All types intended for MIG/MAG welding
Maximum gas pressure 5 bar (0.5 MPa)
Permissible load at +40°C:
40% duty cycle 500 A / 39 V
60% duty cycle 450 A / 36 V
100% duty cycle 350 A / 31.5 V
Enclosureclass IP44