12
H ETHERNET port
Use a LAN cable to connect to a network.
Use a commercially-available LAN cable for connection.
I USB drive port (USB DRIVE)
Connect, for example, USB flash drives that contain audio files
here.
o This port can only be used to play audio files contained on
the connected USB flash drive or other device.
o To play audio files on a USB flash drive or other device con-
nected to the USB DRIVE port, set the input source to NET
and use an app for playback (page14).
J USB port
Use this to input digital audio from a computer. Connect it to a
computer’s USB port.
Use a commercially-available USB cable for connection.
o Before connecting, read pages22 to page23.
K AC power inlet (~IN)
Connect the supplied power cord to this AC inlet.
After completing all other connections, plug the power plug
into a power outlet.
V
Use only a genuine ESOTERIC power cord. Use of
other power cords could result in fire or electric
shock.
V
Disconnect the power plug from the outlet if you
will not use the unit for a long time.
L SOFTWARE maintenance port
This is used for maintenance. Do not connect anything to this
port unless instructed to do so by our service department.
Connecting to networks and USB devices
USB cable
USB flash drive, etc.
Make this connec-
tion when using this
unit as a USB DAC.
LAN cable
To Wi-Fi™ router
Included power cord
Wall outlet
3
Computer
To Next Page
Loading...
Need help?
General
