9.6. Machinery Compartment
9.6.1. Refrigeration System Mechanical Cascade Refrigeration System.
9.6.2. Compressor 2 HP x 2 Hermetic Compressor.
9.6.3. Condenser A = Air Cooled; W = Water Cooled.
9.6.4. Expansion System Expansion Valve and Capillary Tube.
9.6.5. Refrigerant Non CFC.
9.7. Water Supply Compartment
9.8.1. Inside Refrigeration Service Taps.
9.8.2. Right Side Water and Drain Connection Port.
9.8. Cable Port Inside Diameter: 4” (100 mm), Left Side,
Center of Workspace.
9.9. Instrumentation Panel
9.9.1. Model Temperature Controller: SCP-220.
9.9.2. Overheat Protector
Setting Range -99 to 199°C (-146 to 390°F).
Sensor Thermocouple Type T.
9.9.3. Running Time Meter Non-Resettable Range to 99999.9 hrs.
10. Safety Devices
10.1. Electrical
Devices
Purpose
10.1.1. Main Disconnect (Circuit Breaker) Protection of Equipment
10.1.2. Thermal Fuse Protection of Equipment
10.1.3. Overheat Protector Protection of Specimens
10.1.4. Refrigeration High Pressure Switch Protection of Equipment
10.1.5. Refrigeration Compressor Overheat Sensor Protection of Compressor
10.1.6. Motor Protector Protection of Compressor
10.1.7. Fuse for Heaters Protection of Equipment
10.1.8. Thermal Switch (Internal to Circulator) Protection of Equipment
10.1.9. Fuse for Control Circuit Protection of Equipment
10.1.10. Specimen Power Supply Control Terminal Protection of Specimens
10.1.11. External Alarm Terminal Protection of Equipment
11. Accessories
11.1. Cable Port Plug Qty: Two (2).
11.2. Manuals Instruction Manuals (Chamber and Controller).
Replacement Parts Lists.
To Next Page
Loading...
Need help?
General
